PHENYLSULFONATE CA
PHENYLSULFONATE CA
Phenylsulfonat CA
Phenylsulfonat CA is an anionic emulsifier component for EC and EW crop protection formulations.
Phenylsulfonat CA
ALKYLBENZENE SULFONATE
Phenylsulfonat CA is an anionic emulsifier for crop protection applications. Phenylsulfonat CA has been the standard anionic emulsifier component in uncountable EC formulations for years.
Calcium alkyl benzene sulphonate in isobutanol
Emulsifier for Crop Protection Formulations
Composition
iso C12 alkylbenzene sulfonate calcium salt,in isobutanol (the branched alkyl chain based on Tetrapropylene)
Active [%] :70
Ionicity anionic
Product properties *)
Composition/information on ingredients
Chemical characterization : Calcium alkyl benzene sulphonate in isobutanol
Hazardous ingredients
Iso-Butanol
Concentration : 20 – 40 %
CAS number : 78-83-1
EINECS number : 201-148-0
Hazard symbols Xi
R phrases 10 37/38 41 67
Tetrapropylene benzene sulphonate-Ca-salt
Concentration : 60 – 80 %
CAS number : 11117-11-6
EINECS number : 234-360-7
Hazard symbols C
R phrases 21 34 52/53
Appearance: Clear, brownish, viscous liquid
Chemical/Physical data
pH [5 % tel quel in Ethanol/water 1:1]: 6.0 – 8.0
Flash point [°C; DIN 51755]: 33
Density [g cm-3; 20°C]: approx 1.015
Solidification point [°C; DIN 51583] ± 0
Water content: [%; K.F.; DIN 51777] < 0.5
Solubility
Clear solution in benzene, cyclohexanone, mineral oils,petroleum, solvent naphtha, toluene, xylene etc.: insoluble in water
Application
Biocidal emulsifiable concentrates are intended to form stable emulsions when mixed with water.
It is common practice to use mixed emulsifiers in their manufacture.
A mixed emulsifier has an anionic and a nonionic component, and the latter in turn may consist of several, chemically different constituents.
Phenylsulfonat CA has proved suitable as an anionic component. The following products can be used as nonionic components:
Genapol O, M, PF grades
Emulsogen EL 360
Sapogenat T grades
The amount of emulsifier used depends on the degree of stability required; it is usually 3-15 % relative to the concentrate
Guide formulations
50.0 % Parathion ethyl approx. 98 %
45.0 % Xylene
2,5 % Emulsogen EL 360
2,5 % Phenylsulfonat CA
40.0 % Malathion approx. 98 %
56.0 % Xylene
2.4 % Emulsogen EL 360
1.6 % Phenylsulfonat CA
50.0 % Parathion methyl approx. 80 %
45.0 % Xylene
3.3 % Emulsogen EL 360
1.7 % Phenylsulfonat CA